One of my favorite things to do is make a mug rug. It is relaxing and something that can be completed in no time at all. This little quilted mug rug was made using batik scraps from a table runner that I am working on.
Wine String Mug Rug tutorial
7″ x 9.5″
How to make one
Pick some leftover scraps of batiks or other quilt fabrics that you have on hand. Most of the pieces are between 3/4″ and 1½” wide.
I happened to have an old telephone book and the pages are perfect for strip piecing. You could also use copy paper.
Mug rug size
There is no set size for a mug rug, I just go with whatever size paper and fabric strips I have. Sometimes I have pieced lengths of scraps to have a length to cover the size I have chosen.
Start adding strips to the paper foundation. Add one strip to the center of the paper right side up. Sometimes it helps to put a dab of Elmers Washable Glue on the phone book page.
Add strips to each side of the center strip. Place them right side down on top of the center strip.
Add fabric strips
Normally you would use a ¼” seam allowance. Since this is going to be a mug rug and I had narrow strips, I decided to go with a narrower seam allowance. Press your seams as you go.
Continue adding strips of batik scraps to cover the entire paper.
Use larger scraps for the corners if you have them. If not you can keep adding narrow strips.
Here is the back of my strip-pieced fabric. Completely cover the paper foundation, press, and trim. Next, carefully pull off the paper.
Add batting, backing, and quilt. I was able to find enough of the pink batik for the backing. You can see my stitching on the backside.
All I did was change my thread length to basting and stitched along each seam. Some of my lines are a little wonky but that is okay, you really don’t notice it that much on the front.
Cut the binding width 2¼”. I had a fat quarter piece that I was able to use. I cut two pieces 2¼” x 22″ and had more than enough to bind the mug rug.
I like to sew my binding on using my sewing machine. You can also hand-stitch your binding. Normally I will stitch on the front side right next to the edge of the binding. When stitched from the back sometimes the stitching is over just a bit as shown below.
Here is the back of the mug rug. I stitched right along the edge of the binding.
This coffee cup is the only one that works with the mug rug. When we moved I downsized and took my huge assortment of mugs to Goodwill. Guess I’ll have to start a new collection of props!
It isn’t too early to start thinking about Valentine’s Day. This would be a perfect little gift. Be sure and look at my other tutorials for Valentine’s Day.
A mug rug would also make a perfect gift with a wine glass and….a bottle of wine!
Other mug rug tutorials you might like
Download a PDF of this tutorial – if you already subscribe to my newsletter you can sign in to my resource library and you’ll find this download. If not, then please fill out the form below to get it.
Please note this post contains affiliate links, which means I’ll earn a small commission if you purchase through my link at no extra cost to you. Please see full disclosure here. As an Amazon Associate I earn from qualifying purchases.
Great deals for you
I want to share some of the sites that I personally like visiting for the quilting and craft things I buy.