This post may contain referral/affiliate links. Please read my disclosure for more info.
I always enjoy making a quilt project with the new dies that come out for the AccuQuilt GO! cutter. Today I am sharing a beautiful batik mini tablerunner made with the AccuQuilt GO! Spiderweb die. Have you seen this new die? It is so much fun to use.
This is a die is used to create a 6 inch finished Spider Web traditional quilt block. Using the die really makes it easy.
Spiderweb Mini Runner
9″ x 26″
GO! FABRIC CUTTERS:
GO! CUTTING DIES:
FABRIC: I used batiks from Island Batik
- 1/2 yard cream fabric
- 1/3 yard batik print
- 1/2 yard tan batik
- 10″ x 30″ batting
- 10″ x 30″ backing
- Place on fabric on die with wrong sides together.
- Cream – Cut a 8½” by width of fabric strip – sub-cut 4 groups.
- Print – Cut a 8½” by width of fabric strip – sub-cut 4 groups.
- Tan – Cut a 8½” by width of fabric strip – sub-cut 4 groups.
Download the Template for the Spider Web block
The photos below show you the 4 sections of the Spiderweb die.
Sew with a 1/4″ seam allowance and make sure the notches are all at the narrow point of the center piece as shown.
If you don’t do this your blocks will turn out wonky….ask me how I know.
Continue adding the sections.
- Make 4 sections that are tan and white pieces.
- Make 4 sections that have a tan center, white pieces and the print for the third piece.
- Make 2 block sections that are the print and white pieces.
Arrange as shown below.
You would normally match the notched sections together and stitch your blocks but I decided to do this layout. Sew together following the diagram below.
Add your backing, a layer of batting and quilt as desired. Use the 2 1/2″ strip cutter die to cut your binding. Cut two strips.
I hope you have enjoyed the AccuQuilt Spider Web Mini Table Runner tutorial!
Here are some other posts that will inspire you:
This post may contain affiliate links. Please see my full disclosure policy for details.